Correction to: EKLT: Asynchronous Photometric Feature Tracking Using Events and Frames

International Journal of Computer Vision - The original version of this article was unfortunately omitted to publish the footnote “The best result per row is highlighted in bold” in...     

Three-phase four-wire shunt active power filter based on the SOGI filter and Lyapunov function for DC bus control

The three-phase four-wire shunt active power filter (SAPF) was developed to suppress the harmonic currents generated by nonlinear loads, and for the compensation of unbalanced nonlinear load currents, reactive power, and the harmonic neutral current. In this work, we consider instantaneous reactive power theory (PQ theory) for reference current identification based on the following two algorithms: the classic low-pass filter (LPF) and the second-order generalized integrator (SOGI) filter. Furthermore, since an important process in SAPF control is the regulation of the DC bus voltage at the capacitor, a new controller based on the Lyapunov function is also proposed. A complete simulation of the resultant active filtering system confirms its validity, which uses the SOGI filter to extract the reference currents from the distorted line currents, compared with the traditional PQ theory based on LPF. In addition, the simulation performed also demonstrates the superiority of the proposed approach, for DC bus voltage control based on the Lyapunov function, compared with the traditional proportional-integral (PI) controller. Both novel approaches contribute towards an improvement in the overall performance of the system, which consists of a small rise and settling time, a very low or nonexistent overshoot, and the minimization of the total harmonic distortion (THD).     

A rubber-modified thermoplastic where the morphology produced by phase-separation induced by polymerization disappears at high conversions

An unexpected experimental finding is reported where the primary morphology developed during polymerization-induced phase separation in a rubber-modified thermoplastic practically disappears at high conversions. This process was evidenced by light scattering (LS) and scanning electron microscopy (SEM) for a particular composition of solutions of polyisobutylene oligomers (PIB) in isobornylmethacrylate (IBoMA), during the free-radical polymerization of the monomer. The primary phase separation produced a dispersion of domains rich in PIB containing significant amounts of the monomer (IBoMA). Polymerization of the monomer in these domains occurred at high overall conversions producing the filling of dispersed domains with a PIBoMA-PIB blend that could not be distinguished from the matrix. Under these conditions the final material had the appearance of a homogeneous blend.     

Theory,design, and evaluation of the rotating polarizer interferometer

We present the results of modeling the response of a Rotating Polarizer Interferometer (RPI), an actual design and the evaluation of it. The RPI was introduced almost 10 years ago by Erickson [1] and since then it has not received too much attention from the millimeter wave community despite its very attractive characteristics, this is perhaps due to a lack of proven designs to encourage potential users. Here we show that with proper design equations a predictable result can be achieved and that a working device with a low-loss dielectric filling (Teflon) is feasible     

Characteristics of a NaOH-Activated Blast Furnace Slag Blended with a Fine Particle Silica Waste

Mortars of blast furnace slag blended with a geothermal silica waste at various replacement levels of 0%, 5%, 10%, 15%, and 20% were cured for up to 90 days. The binder was activated by 6 wt% Na₂O equivalent of sodium hydroxide. Lime was added as an activating agent and also to promote pozzolanic reaction with the silica. It was found that the presence of the silica waste increased the reactivity of the cementitious materials, as measured by means of nonevaporable water. The compressive strength was increased in the presence of the silica, except at the highest replacement level of 20%, the optimum silica replacement was that of 5%–10%. The microstructures of blended slag showed less porosity than those of neat slag mortars. The lime was completely consumed after 90 days of hydration.     

Identification of aroma components of Spanish ‘Verdejo’ wine

Aroma components of ine resulting from fermentation of grape must from the Verdejo cultivar ere isolated by continuous liquid-liquid extraction and further fractionation on a silica gel column. One hundred and thirty-to substances, including alcohols, esters, carbonyl compounds, terpenes, acids and sulphur compounds, ere identified by using GC-MS; some had not been previously detected in ines. Data are given hich could lead to the characterisation of the Verdejo cultivar and the effect of the elaboration of young ines. The sensory contribution of some volatile compounds to the flavour of Verdejo ine is also studied.     

Fractionation and characterisation for antioxidant activity of hydrolysed whey protein

Whey protein isolate (WPI) was hydrolysed for 1 h using Alcalase, Protamex and Flavourzyme. Native WPI, hydrolysed WPI and two commercial WPI hydrolysates were subjected to fractionation by size exclusion chromatography. Antioxidant activity of WPI fractions was measured with a liposome‐oxidising system (50 µM FeCl₃/0.1 µM ascorbate, pH 7.0). Lipid oxidation was measured as thiobarbituric acid‐reactive substances (TBARS). Gel electrophoresis and amino acid analysis were run to identify the peptide composition. The influence of amino acid composition on antioxidant activity was evaluated using multivariate analysis methods (correlation analysis, principal component analysis, multiple linear regression and discriminant analysis). TBARS assays indicated the presence of antioxidant activity in all protein fractions, including non‐hydrolysed WPI. For native and hydrolysed WPI samples the first fraction (> 45 kDa) showed a higher TBARS inhibition effect (24–27%) when compared with lower‐molecular‐weight fractions and hydrolysate mixtures. In contrast, for commercial WPI hydrolysates a higher inhibitory effect was found in most of the lower‐molecular‐weight fractions (30–55%). The ability of WPI fractions to delay lipid oxidation was found to be related to the prevalence of histidine and hydrophobic amino acids. Copyright © 2004 Society of Chemical Industry     

Planetary exploration by robotic aerovehicles

Planetary aerobots are a new type of telerobotic science platform that can fly and navigate in a dynamic 3-dimensional atmospheric environment, thus enabling the global in situ exploration of planetary atmospheres and surfaces. Aerobots are enabled by a new concept in planetary balloon altitude control, developed at JPL, which employs reversible-fluid changes to permit repeated excursions in altitude. The essential physics and thermodynamics ofreversible-fluid altitude control have been demonstrated in a series of altitude-control experiments conducted in the Earth's atmosphere, which are described. Aerobot altitude-control technology will be important in the exploration of seven planets and satellites in our solar system. Three of these objects—Venus, Mars, and the Saturnian satellite Titan—have accessible solid surfaces and atmospheres dominated by the dense gases nitrogen or carbon dioxide. They will be explored with aerobots using helium or hydrogen as their primary means of buoyancy. The other four planets—Jupiter, Saturn, Uranus, and Neptune—have deep atmospheres that are predominantly hydrogen. It may be possible to explore these atmospheres with aerobots inflated with atmospheric gas that is then radiatively heated from the hotter gaseous depths below. To fulfill their potential, aerobots to explore the planets will need autonomous state estimators to guide their observations and provide information to the altitude-control systems. The techniques of acquiring these data remotely are outlined. Aerobots will also use on board altitude control and navigation systems to execute complex flight paths including descent to the surface and exploiting differential wind velocities to access different latitude belts. Approaches to control of these systems are examined. The application of aerobots to Venus exploration is explored in some detail: The most ambitious mission described, the Venus Flyer Robot (VFR), would have the capability to make repeated short excursions to the high-temperature surface environment of Venus to acquire data and then return to the Earth-like upper atmosphere to communicate and recool its electronic systems. Finally a Planetary Aerobot Testbed is discussed which will conduct Earth atmospheric flights to validate autonomous-state-estimator techniques and flight-path-control techniques needed for future planetary missions.     

First experiences of teaching quantum computing

The Journal of Supercomputing - Quantum computing is a reality that presents challenges to computer engineering students and practitioners. It has been claimed that it is possible to effectively...